Yonico Medium Lock Miter Router Bit - 45° - 3/4" Stock - 1/2" Shank - 15127

<p> Additionally, it will provide extra gluing surface resulting in an extremely strong and durable joint. It can be little tricky at first but when positioned properly, the bit will cut both pieces of stock without having to adjust the bit. Simply set the center of the stock to the center of the bit. Ideal for use with 3/4" stock. Then, cut one piece horizontally and the second one vertically and the joint should line up perfectly. Instructions are available from the manufacturer upon request. Note: Lock miter bits only work properly on solid wood. MDF and plywood are not recommended.</p>

• Use the reversible 45° lock miter glue joint Router bit to join boards at 90°. The interlocking 45° cuts will produce extremely strong joints without having to struggle to keep the boards in place during clamping. Two flute carbide cutters & 1/2" shank.
• Join boards at a 90 degree angle with an interlocking profile for a perfectly aligning joints
• Premium C3 micro-grain Carbide blades for a sharper & longer lasting edge